培养箱生产厂家

联系我们

济南创日新仪器设备有限公司

联系人:毛经理

电话:13396405929

邮箱:mqyprc@126.com

网址:www.crxyq.cn

地址:山东省济南市高新区舜华路2000号

操纵恒温恒湿设备恒温箱溫度的6小步

时间:2019-09-25 文章来源:www.crxyq.cn 作者:创日新仪器 浏览次数:1826

在使用恒温恒湿培养箱的时候,我们应该怎么控制好它的温度呢,下面让恒温恒湿培养箱厂家带大家了解一下控制恒温恒湿培养箱的六个步骤。

When using constant temperature and humidity incubator, how should we control its temperature? Let the incubator manufacturer show you six steps to control constant temperature and humidity incubator.

一、温度控制:

1. Temperature control:

产品出厂前已经将温度置定在37 ℃。如果要求恒温培养箱工作温度37℃,只要按下电源开关即可运行。

The temperature of the product has been set at 37 C before leaving the factory. If the constant temperature incubator is required to work at 37 C, it can be operated by pressing the power switch.

二、按下电源开关,两秒钟后温度显示窗会显示工作室的当前温度。

2. Press the power switch. After two seconds, the temperature display window will show the current temperature of the studio.

三、工作室温度设置:

3. Studio temperature setting:

操作温度设置模式选择键,能使温度控制系统分别进入温度设置模式、水温修正设置模式、温度检测控制模式。

Operating temperature setting mode selection key can make the temperature control system enter temperature setting mode, water temperature correction setting mode and temperature detection control mode respectively.

四、按下温度设置模式选择键两秒钟后松开,这时温度设置状态指示灯亮,同时温度显示窗数字闪烁地显示出设定的温度,表示进入温度设置状况。

4. Press the Temperature Setting Mode Selection Key and release it two seconds later. Then the Temperature Setting Status Indicator lights up. At the same time, the Temperature Display Window displays the set temperature with digital flicker, indicating that it is in the Temperature Setting State.

五、培养箱水套采用不锈钢氩弧焊制作经久耐用,隔水式加温方式,温度均匀且断点后仍能保持较长时间恒温。

5. The water jacket of the incubator is made of stainless steel by argon arc welding, which is durable and water-proof heating mode. The temperature is uniform and can remain constant for a long time after the breakpoint.

六、温仪采用高速、高性能CPU处理芯片,高灵敏、高精度铂电阻传感器,具有定时开机、定时关闭、定值工作的固定编程控制功能。

6. The thermometer adopts high-speed and high-performance CPU processing chip, high-sensitivity and high-precision platinum resistance sensor. It has fixed programming control functions of timing start-up, timing shutdown and fixed-value operation.

定时时间长达99小时。

The timing lasts up to 99 hours. http://www.crxyq.cn/